Rainwater tank

Rainwater harvesting is considered normal in many parts of the world where environmental awareness is developed.

Let us hope that in the course of time in our country awareness will be raised about the utilization of rain potential, given that in our region about 30 thousand liters of clean water fall on a roof of 50 square meters in one year, it would be a pity not to use that a resource that will go down the drain.

Water is the basis of humanity. Many people today face problems with water supply, especially in environments where there is no water supply system, ie water supply network. The average EU water consumption is around 100l-150l per day (bathing, dishes, drinks) and the water must meet strict hygiene regulations.

Čabar Plast produces rainwater collection tanks made of PEHD which:

• guarantee waterproofing and are a long-term solution because the material loses only 5% of its properties after 50 years of use,
• reservoirs made by mound layer are UV resistant, withstand extreme temperatures from -30 ° C to + 80 ° C,
• have been environmentally tested (non-polluting) by PEHD,
• thermostable,
• have good carrying capacity,
• they are shock-proof, which means they have no visible traces,
•  and, crucially, they are easy to install and have minimal maintenance costs.

Čabar Plast water tanks are used as rainwater tanks.

In places where there is a problem with water supply where there is a lack of sufficient drinking water, we recommend installing our rainwater storage tanks, which, in addition to a large water tank or rainwater tank, also have a smaller activated carbon tank that serves as a filter. purifier of collected rainwater so that the water can be further used as technically sound.

The benefits of rainwater storage tanks:

• Unlimited water capacity (you can water the garden, fill the pool, used for laundry, dishes, shower without any fear).
• Reduced use of water from the water supply system. (You will only use drinking water, which represents only 5% of the total water consumed.)
• Lower water costs for consumed water.
• Easy transport and installation.
• Easy maintenance.

Prerequisites for installing rainwater collection tanks.

If you decide on a rainwater tank, you need to know that you need to provide

• The surface from which rainwater would be collected on the steamer roof of a house, building, cottage or other object on which a net for separating moss, bird droppings, leaves is placed, so-called mechanical filter.
• Rainwater from the roof, the gutter goes to the pipe to a smaller reservoir that has the role of a filter, that is, protection from stones, sand and other small parts.
• From there, it connects via a drain pipe from the filter to a reservoir that can be a horizontal or vertical reservoir in which the collected rainwater is stored.
• Čabar reservoirs have inlets for inlet, drainage and overflow, if there was excess water when the reservoir was full it would drain that excess water

We offer delivery of plastic rainwater tanks in many versions, diameters and heights at the best prices in the country a and beyond.

Čabar plast still produces manholes for water meters, ventilation pipes, tanks, tanks, barrels, plates, vertical plastic tanks, pontoons, catamarans.
Depending on your household needs, it is necessary to determine the volume of the tank in which to store rainwater.
You can see some of the standard dimensions of the Čabar Layer of vertical rainwater collecting tanks here.