Ventilation pipes

 

Čabar Plast ventilation pipes can be rectangular or round, ie. cylindrical shape.
They are used for the discharge of gases and vapors from households, farms, fattening plants, industrial facilities and plants. Plastic roof ventilation pipes and plastic ventilation vents or plastic ventilation chutes are used to discharge vapors.

They are widely used in industrial buildings and farms.

Čabar plast ventilation pipes in farms are usually mounted on the roofs of farms and fattening yards and on our pipes it is possible to install all types of standard fans for evaporation output from the farm or fattening plant.

Čabar Plast ventilation tubes are made of PEHD which:

guarantee waterproofing and are a long-term solution because the material loses only 5% of its properties after 50 years of use,
ventilation tubes are UV resistant, withstand extreme temperatures from -30 ° C to + 80 ° C,
ventilation tubes have been environmentally tested (non-polluting) by PEHD,
ventilation pipes are thermostable,
ventilation pipes are corrosively resistant to the impact of the interior of the building,
have good carrying capacity,
they are shock-proof, which means they have no visible traces,
and, crucially, they are easy to install and have minimal maintenance costs.

Čabar Plast ventilation pipes are made of high density polyethylene as well as our pontoons, catamarans, water tanks, vertical water tanks, oil tanks, fire pit tanks, plates, irrigation tanks, septic tanks, grease and oil separators, plastic wine vats.

All our ventilation pipes can be fitted with so-called butterfly valves that prevent the rainfall, snow, hail, or any atmospheric precipitation in the building.

 

High density polyethylene plastic ventilation pipes ie. PEHDs are made in standard diameters as follows:

  • Ø 300 mm,
  • Ø 400 mm
  • Ø 500 mm
  • Ø 600 mm
  • Ø 800 mm
  • Ø 1000 mm
  • Ø 1200 mm
  • Ø 1300 mm
  • Ø 1600 mm pa sve do
  • Ø 3000 mm

According to the needs and requirements of the customer can be made in all lengths and in different diameters, the connection is made by flanges, There is also the possibility of making the knee of different degrees to carry out the ventilation pipes of your choice, it is only necessary to know the radius from which the knee is made for ventilation pipes.

We produce the highest quality ventilation pipes at the best prices.

Call us and see for yourself.

The Čabar plast ventilation pipes are quick and easy to install, they are cheaper, they are not corrosive, they are thermostable unlike tin or galvanized ducts.

There is a possibility of installing a diffuser to achieve a uniform flow rate of air in the biosphere belt.

Čabar Plast Čabar blinds also serve to regulate flow. We also have sandblasting blinds that achieve the separation of sand from the air flow. Combination blinds are a combination of fixed and control blinds.