Plastic tanks are made the same: whether it’s horizontal tanks or vertical plastic tanks. The technology of production is the same, and the vertical tanks can be closed and open, plastic tubes. Closed plastic tanks are made of high density polyethylene HDPE and polypropylene PP.
Plastic tanks have unlimited use
Thanks to the properties of the materials from which they are made, their application is very wide: they can be water tanks, and various liquids can be stored, which is why it has a great application in the chemical industry because it is resistant to various aggressive chemicals. They are ideal as reservoirs for all kinds of liquids, but they can also store grain and powder materials.
Due to the characteristic that they do not absorb odors, nor the taste of matter or fluid, and do not affect changes in properties, they often use them as fuel tanks or any other fuel, biodiesel or fuel
Advantages of such tanks as they can be mounted on terminals and accessories without limitations, all according to the needs and requirements of customers. If you need any of these connections, be sure to indicate when ordering the tanks. Some of the connectors that are most commonly installed are various valves, taps, level indicators, external or internal thread connections.
Plastic water tanks
One of the most common and largest uses of the reservoir is to be used as water tanks. We have already mentioned that it is possible to install any connector on them, which is a great advantage. They are easy to manipulate and can be positioned as overhead water tanks anywhere.
[notice] plastic tanks are placed only on a flat surface[/notice]
The easiest and fastest ones can be put into a fuction for supplying household or cottage water by placing them somewhere in the house, most likely on the slab below the roof and connecting with the home installations. Can be used with additives from activated carbon for water treatment and rainwater storage.
Possibilities for using plastic reservoirs
Depending on the mode of application, these reservoirs can be modified in various ways. If it is necessary to preserve the temperature of the material stored in them (either high or low temperature) it can be made as thermo-insulated tanks. If you store hazardous materials in them, it is possible to build a dual-walled tank that will protect against spills or some external influences on the fluid being stored.
We produce plastic tanks of standard dimensions, but we mainly produce them according to the order and needs of customers. Based on your needs, size and volume of your tank and its purpose, we will perform budgeting and dimensioning. So every tank can be adapted to all your needs.
Zapr (l) |
250 |
500 |
1000 |
1500 |
2000 |
3000 |
4000 |
5000 |
6000 |
7000 |
8000 |
9000 |
10000 |
15000 |
Prečn.D |
600 |
800 |
1000 |
1200 |
1320 |
1600 |
1600 |
1850 |
2000 |
2170 |
2320 |
2460 |
2600 |
2600 |
Vis. H |
900 |
1000 |
1300 |
1350 |
1500 |
1500 |
2000 |
1900 |
1900 |
1900 |
1900 |
1900 |
1900 |
2850 |