Plastic horizontal tanks – water tanks, oil tanks …

Plastic tanks are made the same: whether it’s horizontal tanks or vertical plastic tanks. The technology of production is the same, and the vertical tanks can be closed and open, plastic tubes. Closed plastic tanks are made of high density polyethylene HDPE and polypropylene PP.

 

Plastic tanks have unlimited use

Thanks to the properties of the materials from which they are made, their application is very wide.

rezervoari za vodu

They can be water tanks, and various liquids can be stored, which is why it has a great application in the chemical industry because it is resistant to various aggressive chemicals. They are ideal as reservoirs for all kinds of liquids, but they can also store grain and powder materials.

Due to the characteristic that they do not absorb odors, nor the taste of matter or fluid, and do not affect changes in properties, they often use them as fuel tanks or any other fuel, biodiesel or fuel

Advantages of such tanks as they can be mounted on terminals and accessories without limitations, all according to the needs and requirements of customers. If you need any of these connections, be sure to indicate when ordering the tanks. Some of the connectors that are most commonly installed are various valves, taps, level indicators, external or internal thread connections.

Plastic water tanks

One of the most common and largest uses of the reservoir is to be used as water tanks. We have already mentioned that it is possible to install any connector on them, which is a great advantage. They are easy to manipulate and can be positioned as overhead water tanks anywhere.

Plastic water tanks can be vertical and horizontal

The easiest and fastest ones can be put into a fuction for supplying household or cottage water by placing them somewhere in the house, most likely on the slab below the roof and connecting with the home installations. Can be used with additives from activated carbon for water treatment and rainwater storage.

Possibilities for using plastic reservoirs

Depending on the mode of application, these reservoirs can be modified in various ways.

If it is necessary to preserve the temperature of the material stored in them (either high or low temperature) it can be made as thermo-insulated tanks. If you store hazardous materials in them, it is possible to build a dual-walled tank that will protect against spills or some external influences on the fluid being stored.

We produce plastic tanks of standard dimensions, but we mainly produce them according to the order and needs of customers. Based on your needs, size and volume of your tank and its purpose, we will perform budgeting and dimensioning. So every tank can be adapted to all your needs.

We often get questions, what are the volumes and how are the cents of the plastic water tank moving?

The price of the tank depends on the size but also on the transport, so it is best to contact us. The dimensions usually ordered are given in the table.

Zapremina (l)

250

500

1000

1500

2000

2500

Prečnik(D)

600

800

1000

1200

1300

1300

Visina(H)

800

1000

1300

1350

1500

1875

 

Zapremina (l)

3000

4000

5000

6000

7000

8000

Prečnik(D)

1600

1600

1600 | 1800

1600 | 1800 | 2000

1800 | 2000

2000 | 2400

Visina(H)

1500

2000

2500 | 1960

3000 | 2400 | 1950

2800 | 2260

2570 | 1790

 

 

Zapremina (l)

9000

10000

12000

15000

20000

22500

Prečnik(D)

2000 | 2400

2000 | 2400

2400

2400 | 3000

2400 | 3000

2400 | 3000

Visina(H)

2900 | 2020

3200 | 2240

2680

3360 | 2150

4470 | 2850

4990 | 3200

 

Zapremina (l)

25000

30000

35000

40000

45000

50000

Prečnik(D)

2400 |3000

2400 | 3000

3000

 3000

3000

3000

Visina(H)

5560 | 3550

6720 |4260

4970

5700

6390

7100